2011/09/29

Now on YouTube

On YouTube, there is a competition call "Get Your Blunt Shit Sharp (Knife Sharpening) Competition" on going. It is a competition from the channel cKc knivesandstuff and the prizes are very generous.

But that is not the reason I am making post about it on this blog. What amazing about this competition is that the participants’ entry. So many people and so many different ways of how people sharpens them knives. Some are really skilled, some are not, but all of them get them knife sharpened and have something to offer to others that you have something you can learn from it.

If you are interested in knives and sharpening knives, I recommend go check it out! Also remember to check out the initial video post knivesandstuff has made. It is explaining why he has started this competition and that video is also the one you should watch if you like knives.

Link:
To his channel>> http://www.youtube.com/user/knivesandstuff
And the competition entries >> http://www.youtube.com/video_response_view_all?v=2vELqOJXXik


Have fun!! and good luck to all who are participating the competition.

2011/09/26

Axe again??? – また斧

“Axe againe???” that my SWMBO saied when I have picked this one up from free market while we are traviering Tammisaari in summer.
I know myself that I have got more than enough axes to use, but cant help it when I see good old axe in good condition like this. And further more, the price was really good.
 また斧??などと妻に言われつつも、夏休みの旅行中に立ち寄ったフリーマーケットで入手。自分でもこんなにいくつも斧いらないとは判ってるのだけど、ヤッパリ状態の良い古い斧を見るとネ!値段も気が引けるくらい安かったし・・・


What I got this time is an Axe head from Kellokoski. It is an old Finish maker, which died out like Billnäs after chain saw came out to market.  Also in Finland (or from Kellokoski and Billnäs), this style of head was not common and called “Canadian style” on them old catalog.
I have had it rust removed, but nothing els was done till now. But I wanted to use it this weekend, decided to hang it now.
今回手に入れたのはKellokoskiというフィンランドのメーカーの物。この会社もBillnäsと同じく、チェーンソーの登場と共に消えて行ったメーカー。 そしてこの形の斧は結構珍しく、KellokoskiとBillnäsの昔のカタログ見ても『カナダ型』として一品掲載されているだけ。
錆取りした後、ずっと放置してあったのを、今週末使いたいので急遽柄入れしました。

Cleaned and polished and sharpend, then fit the helve. Hulttafors’ hickory helve was just good size, so no work was needed to fit well. The easiest hanging work ever.
研ぎあげて、磨いて、柄入れ。柄はHulttaforsのヒッコリー柄がちょうどぴったりだったので、大した削り作業無しで完成!今までで一番楽なスゲ作業でした。
The axe head: about 800g
Helve about 60cm
Lets see how this will work!

斧頭>約800g
柄>約60cm
後はシースを作って、今週末に持ち出すだけ!

2011/09/19

人体実験試し切り・・・

はじめに警告!!
この記事中にあるリンクをクリックすると、非常にグロな画像が開きます。グロ系がだめな方、見たくない方はリンクを開かない様お願いします。

Warning!! The links on this post will open images, which are very disturbing to some eyes. Please donot open it if you do not have stomach to such images or do not wish to see them.



では、警告が終わったところで今回の本題に入ります。実はこの出来事を記事にするかどうか非常に迷って板のですが、結局『切り傷の対処法紹介』という事でアップする事にしまいした。
約一月前、自作ナイフをどれだけキンキンに研ぎ上げられるか?という疑問がわき、気合入れて研いで見たのです。で、色々な物で試し切りし、髪の毛スライスに挑戦してみました。髪の毛一本を刃先に滑らせると・・・ツーーーーット裂けるように、縦にスライスできちゃうんですよ。これはびっくり楽しい!という事で、調子に乗ってスパスパ切っていたら・・・
やっちゃいました。親指の先、見事に2mmくらい落としました。
指に何か当たったかな?と思ったら、ナイフの先に何かが付いてます???
http://i923.photobucket.com/albums/ad72/OZme/misc/P1070881.jpg
そう、指先の皮!
http://i923.photobucket.com/albums/ad72/OZme/misc/P1070886.jpg
親指の先からはゆっくりと血が湧き出て来るじゃぁないですか、、、、慌てて止血。
http://i923.photobucket.com/albums/ad72/OZme/misc/P1070888.jpg
手近にあったキャンプ用救急バックからテープとガーゼ、ロープ袋から小物固定用の短いロープを取り出して処置。

これで出血がある程度収まったら、本処置です。
ポイント1>出血のあるオープンな傷は絶対乾燥させない!直りが遅い上に、絆創膏やガーゼに傷口が張り付くと、取る時に傷が広がる。
ポイント2>消毒は出来ればしない。綺麗な流水で患部を良く洗うだけで良い。
ポイント3>患部周辺の皮膚がふやけないように注意する。湿りすぎると化膿しやすくなる。
この三つを抑えて処置します。
初日はサランラップを使っていたのですが、これでは湿気が多くなりすぎました。
http://i923.photobucket.com/albums/ad72/OZme/misc/P1070923.jpg
http://i923.photobucket.com/albums/ad72/OZme/misc/P1070918.jpg
これではまずいので、2日目からは、ガーゼにたっぷりのワセリンを塗って患部を覆います。これは保湿しながら、必要以上の湿気を逃がすのでGood! 知り合いの看護婦さんからのお勧めです(やけどの処置にも良いそうです)。
1週間ほどこの状態で処置、二日に1度は洗浄とガーゼの取替えをし。10日ほどで完全に傷はふさがってしまいました。

しかしバカな失敗をした物です。
皆さんはこんなアホでバカな試し切りはしないように!

2011/09/15

Sneak preview what is coming up…

Recently, I have purchased a multi-bladed folder knife from local hardware store for just 1euro / knife….
As you can imagine from the price, it is one of those crappy JUNK knife. But because of it’s price, I bought 2 of them, thinking of using it as law material for some project.

Back to home and start observing the knife, and noticed that the blade is actually carbon steel, and hardened harder than Opinel blade.
This, I have to sharpen it properly and test, so I did…
Sharpened it to razor sharp and it took the good edge. So took it out to my garden work to cut raspberry bushes.


Managed to cut all this without any visible damage to the edge.
So I have put it under the microscope…
100x-200x magnifications…
I see no damages.


200x-300x magnifications…
Found tiny chipping on most used part of edge…

This is a case of  “Cats hide their claws”. Unfortunately, this knife has horrible fittings that do not work properly as a folder, so I need to re-fit it.

Took everything a part and start fixing the problems. This is going to be an exiting project!! And good project for me to understand the construction of multi-bladed folder knives.

2011/09/14

空き缶ガス炉 – Coffee can forge

小物の鍛造&焼入れ用に、簡単に使える小型の炉があると便利かな!?と思い、作り始めてみました。2Lのペンキ缶を利用して作るガス炉です。熱源に、プロパン、ブタン混合ガスのハンドトーチを使うので鍛接は無理だと思いますが、焼入れと鍛造はOK。プロパン使えばたぶん鍛接もいけるかとは思いますが、そうしたらたぶん炉がもたないと思います。
I have decided to make Coffee can forge for light job like small forging job and HT. I have no idea if this works or not… not even sure that if this is safe… well, lets see. I will take all precaution I can think of.

では作り方>
<注意!もし、これを見て『作ってみよう!』と思った方。全て自己責任でお願いします!!>

まずは空き缶を洗います。


缶の側面中央に、ガストーチの先端が入る大きさの穴を開けます。


缶の中にセラミックウールなどで断熱層を作ります。私はセラミックウールが手に入らなかったので、グラスウールを使ってます。テストで燃えないことは確認して在りますが、長時間の使用に耐えるかどうか・・・セラミックウールの方がたぶん安全です。


断熱材で内壁が出来たら、陶芸用粘土を角がしっかりと立つくらいに溶きます。


溶いた粘土で、断熱材を塗り固めます。側面の穴を埋めないように注意!

後はしっかりと乾燥させればOK。たぶん2~3日ほど乾燥が必要でしょうか?今、乾燥待ちです。
乾燥した時点で試し焚き。それで問題がなさそうなら全てを固定する台を作って完成となります。

2011/09/13

Gerber - Bear Grylls - Fire Starter

Found it in the local hardware shop and just had to get it.
And since I bought it, made quick review video of it while un-boxing it, so here you go…

2011/09/08

Monday,Forest,Good Feeling! - 月曜、森、リフレッシュ!

こちらフィンランドは、だんだんと秋らしくなってきました。
月曜日の仕事後、天気が良かったのでちょっと森へ散策へ、いつもの様に犬3頭同行です。
On Monday after the work, the weather was really good, so went for walk in forest.

2011/09/02

4つのプロジェクト、1つ目は完成。

プロジェクト4つ同時進行してます。
1つ目は完成、木のスプーン3本。

 

材はネズの木。
大きい方から、
  なべ掻き混ぜ用
  味見用
  ジャムなどのビン用

プロジェクト2つ目と3っつ目は、だらだらと削り続けてるウォーキングスティックと丸木弓。
ウォーキングスティックの方はほぼ形になってきたのだが、なんとなく重いため、もう一回り細くするために削り中。削り終わったら、石突きを付けて完成。材はナナカマドです。
そして丸木弓の方は二本目の挑戦になる物。一本目、プカラでのキャンプ中に作り始めた物は見事に折れてしまったので、材を変えて再挑戦。今回はネズの木を使っています。大まかな形は削り出せたので、これから反り方の調整に入るところ。ここからが勝負。

4っつ目のプロジェクトはこれ↓↓ベルトキット。
左側から、
>カメラケース(ゴリラポッド収納用のウェッビング付き)。
>Maxpeditionローリーポーリー・ダンプポーチ小(水筒や、軍手を突っ込んでおくのに便利)。
>ティンダーポーチ(以前紹介した物です)。
>ナイフ。

後はポッシブルポーチとエマージェンシーパックを追加すれば完成!??
欲を出してミニクックセットとフードパックも追加しようかな??などと考えてもいるのだけど。あまり追加すると重くなって邪魔だろうな・・・

これが終わってもまだまだ続くプロジェクトの山・・・次に計画しているのは鍛冶物2本、そして昨日の更新で書いたカヌープロジェクト。

カヌーの方はまだまだ計画初期段階、現在設計図と材料の入手先検索中。出来るのかどうかも自信なし、でも挑戦したいものの一つ。期待せずに待っていてください。

2011/09/01

My mind is filled with...

Since the last weekend, my mind is filled with the idea getting my own canoe.
Every time thing like “I want it” comes strong in to my mind, the first step is to seek possibility of making one myself.
This is one of my good (perhaps bad??) habits that before considering buying the ready made one, I start looking for a way to make. Then if that seems to be way too difficult, then start considering of purchasing.

So that what I have started now, browsing through the internet, hours and hours, collecting information on how to build canoe all by myself.

As the research goes, there are several ways to make canoe based on the material used.
1: using plastic or glass fiver to mold the canoe.
>This is what most of nowadays canoes are made. But, it is not realistic method for self-builder. It involves too much initial investment, finding materials in small lot.

2: Wood or Wood & Canvas canoe.
> Very common for high-end / premier canoes and are beautiful. Also this is realistic method for self-builder. But still I am not sure, how much the materials would cost and not sure if I can locate them within or available to Finish market. Also skill required might be too high for me.

3: Birch bark canoe.
> This is most “Bushcraft” like way of making canoe and requires only crooked knife and awl. Material cost is low as well and the skill required seems to be within the reach of mine. But the issue here is the birch bark. It is impossible for me to fined the birch bark, which is suited for canoe making. At least for now, and in near future.

4: Plywood canoe.
> This probably the easiest way to self-build a canoe. It basically cut out the plywood based on template and glue them all together. End result seems to be quite nice, but the issue is,,, I DO NOT LIKE IT!!! I want something more traditional!

5: Skin on frame boat canoe.
> This is very simple, make frame and put the ballistic canvas on top to make the hull. Cheap and easer to make. It also look quite traditional, but I am not quite convinced with it.

Based on this, I decided to look for the ready made ones… but… that is totally out of reach.  Even the used ones are starting from 500e and those are kind of crappy looking. I rather then pay for new inflatable canoe with that money…


Then suddenly came to my mind, What if I replace the birch bark to canvas??? Can it be done??
The beauty of birch bark canoe is that the constriction starts from outer hull, when other canoes are made other way around. This makes the low initial cost and tools required possible. You do not even need to make the mold nor strong-back (the total canoe shaped template).

So went back to look for if someone has done it…
Yes, I found it and it was done by Innu people and is beautiful. They have replaced the birch bark to PVC treated canvas. Also, instead of using cedar, they are using spruce and fir. Those are quite easy to find in here in Finland, and I even might have posibility of getting the logs.

Mmmm… I can start to see the near future projec…


If you are interested in, click the link below to check out the page. It is very interesting and lots of information about Innu people.
http://www.nametauinnu.ca/en/culture/tool/detail/27